![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/Plesk-Type.png\" "\\"Plesk")
<\/a><\/p>\n![\"Add](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/Add-Record.png\" "\\"Add")
<\/a><\/p>\n- \n
- If you want to update a record you have added, first click on the record. On the page that opens, make the changes you want and then click the “Apply > OK” button.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-DNS-Changes.png\" "\\"Plesk")
<\/a><\/p>\n![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-DNS-Changes-Apply.png\" "\\"Plesk")
<\/a><\/p>\n- \n
- After adding all the records, in the area where DNS records are listed, you will see exclamation marks next to the newly added records. This indicates that the records have been added but not yet saved. To make all the records active, click the “Update” button.<\/li>\n<\/ul>\n
![\"DNS](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/DNS-Update.png\" "\\"DNS")
<\/a><\/p>\nIf you have added all the records completely and correctly, it may take up to approximately 24 hours for the records to propagate globally. After this process, you will be able to use your web site or emails smoothly.\u00a0<\/strong><\/p>\n
Examples:<\/h2>\n
Adding an A Record in Plesk Panel<\/h4>\n
- \n
- In the Plesk Panel Zone Editor, click \u201c+ Add Record.\u201d<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/Plesk-Add-Record.png\" "\\"Plesk")
<\/a><\/p>\n- \n
- In the Record Type section, select the “A” record.<\/li>\n
- In the “Domain name” field, enter your domain name or subdomain (e.g., shop, blog) depending on the record you want to add.<\/li>\n
- You can enter the “TTL” value if it has been provided to you. If no value is given, you can leave it as the default.<\/li>\n
- In the “IP address” field, enter the “IP address” of the server you want to point to.<\/li>\n
- If you are sure the records are correct, click the \u201cOK\u201d button.<\/li>\n
- After adding all the records, in the area where DNS records are listed, you will see exclamation marks next to the newly added records. This indicates that the records have been added but not yet saved. To make all the records active, click the “Update” button.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-Add-A-Record.png.png\" "\\"Plesk")
<\/a><\/p>\nAdding an MX Record in Plesk Panel<\/h4>\n
- \n
- In the Plesk Panel Zone Editor, click \u201c+ Add Record.\u201d<\/li>\n
- In the Record Type section, select the “MX” record.<\/li>\n
- You can leave the Mail domain field blank, as it refers to your own domain name and doesn’t require a prefix. However, if your provider has asked you to add a prefix, you can enter it here.<\/li>\n
- You can enter the “TTL” value if it has been provided to you. If no value is given, you can leave it as the default.<\/li>\n
- In the “Mail exchange server” field, enter the information provided by your company (e.g., mx1.fastpanda.com)<\/li>\n
- In the “Specify the priority of the mail exchange server” field, select the value provided by your company (e.g., 10, 20, 50, etc.). If the exact value is not listed, you can choose the closest available option.<\/li>\n
- If you are sure the records are correct, click the \u201cOK\u201d button.<\/li>\n
- After adding all the records, in the area where DNS records are listed, you will see exclamation marks next to the newly added records. This indicates that the records have been added but not yet saved. To make all the records active, click the “Update” button.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-Add-MX-Record.png\" "\\"Plesk")
<\/a><\/p>\nAdding a CNAME Record in Plesk Panel<\/h4>\n
- \n
- In the Plesk Panel Zone Editor, click \u201c+ Add Record.\u201d<\/li>\n
- In the Record Type section, select the “CNAME” record.<\/li>\n
- In the “Domain name” field, enter the record provided to you. This record may sometimes be “www” or “mail”.<\/li>\n
- You can enter the “TTL” value if it has been provided to you. If no value is given, you can leave it as the default.<\/li>\n
- In the “Canonical name” field, enter the record provided by the company (e.g., mail.yourdomain.com).<\/li>\n
- If you are sure the records are correct, click the \u201cOK\u201d button.<\/li>\n
- After adding all the records, in the area where DNS records are listed, you will see exclamation marks next to the newly added records. This indicates that the records have been added but not yet saved. To make all the records active, click the “Update” button.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-Add-CNAME-Record-.png\" "\\"Plesk")
<\/a><\/p>\nAdding a TXT, DKIM, SPF Record in Plesk Panel<\/h4>\n
- \n
- In the Plesk Panel Zone Editor, click \u201c+ Add Record.\u201d<\/li>\n
- In the Record Type section, select the “TXT” record.<\/li>\n
- In the “Domain name” field, enter the record provided to you. This record may sometimes be your domain name or a different record. If you’re only required to enter your domain name, you can leave the field blank.<\/li>\n
- You can enter the “TTL” value if it has been provided to you. If no value is given, you can leave it as the default.<\/li>\n
- In the “TXT Record” field, enter the record provided by the company.<\/li>\n
- If you are sure the records are correct, click the \u201cOK\u201d button.<\/li>\n
- After adding all the records, in the area where DNS records are listed, you will see exclamation marks next to the newly added records. This indicates that the records have been added but not yet saved. To make all the records active, click the “Update” button.<\/li>\n<\/ul>\n
- In the Plesk Panel Zone Editor, click \u201c+ Add Record.\u201d<\/li>\n<\/ul>\n
- After adding all the records, in the area where DNS records are listed, you will see exclamation marks next to the newly added records. This indicates that the records have been added but not yet saved. To make all the records active, click the “Update” button.<\/li>\n<\/ul>\n
If your domain’s NS (Name Server) records are pointed to Fast Panda, the DNS records you add by following the steps below will become active shortly. However, if your NS records are pointed to another provider (such as your domain registrar or a custom server), you will need to add the DNS records through that provider’s control panel. Otherwise, the changes you make will not take effect.<\/p>\n
Steps to Add, Delete, and Update DNS Records in Plesk Panel<\/h2>\n\n- First, log in to your customer panel and then access Plesk Panel. Click here to learn how to log in to Plesk Panel.<\/a><\/li>\n
- When you access the Plesk Panel, click the “Hosting & DNS” button next to your service.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/Plesk-Hosting-DNS.png\" "\\"Plesk")
<\/a><\/p>\n\n- Click on the \u201cDNS\u201d button.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/Plesk-DNS.png\" "\\"Plesk")
<\/a><\/p>\n\n- On the page that opens, you will see your existing DNS records. If there are any existing records with the same type and name combinations as the new web site or email records you are about to add, it is recommended to delete them to avoid conflicts. However, if you are not experienced in this area, it\u2019s best to consult a specialist or get support from our technical team to avoid making any mistakes.<\/li>\n
- To delete an old record, check (tick) the box next to the record, then click the “Remove > Yes, remove” button.<\/li>\n<\/ul>\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/05\/Plesk-Remove-Record.png\" "\\"Plesk")
<\/a><\/p>\n\n- To add a new record, click the \u201c+ Add Record\u201d button.<\/li>\n<\/ul>\n
<\/a><\/p>\n\n
<\/a><\/p>\n\n
<\/a><\/p>\n\n
![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-Add-TXT-Record--e1754202371502.png\" "\\"Plesk")
<\/a><\/p>\n![\"Plesk](\"https:\/\/www.fastpanda.co.uk\/knowledge-hub\/wp-content\/uploads\/2025\/08\/Plesk-Panel-Add-SRV-Record-.png\" "\\"Plesk")
<\/a><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/article>\n","protected":false},"excerpt":{"rendered":"